Stainless Steel Cold Room Evaporator, −50 to 0 °C

About this air cooler evaporator

A stainless steel drum-type evaporator for walk-in cold rooms and industrial freezing systems, operating from −50 to 0 °C. Measuring 180 × 85 × 180 cm, it suits large freezer rooms on 220 V or 380 V.

A cold room evaporator (air cooler) absorbs heat from the room air as refrigerant boils inside its coil. DD series with about 4.5 mm fins suits chillers near 0 °C, DJ series with 6–8 mm fins suits −18 to −25 °C freezers, and DL or wide-fin coils suit blast freezing.

Other configurations of this model

The same design is also built in these configurations — mention the one you need in your inquiry:

• Commercial Air Cooler Evaporator, 180×85×180 cm (−50 to 0 °C)
• Freezer Cold Room Air Cooler Evaporator, Stainless (−50 to 0 °C)
• High-Temp Cold Storage Unit Cooler, 1145 W, Auto Defrost
• Cold Room Evaporator Unit, Copper Tube, 52×52×74 cm
• Walk-In Unit Cooler Evaporator, 52×52×74 cm
• DD/DJ/DL Cold Storage Air Cooler Evaporator
• Low-Noise Stainless Steel Industrial Fan Evaporator
• Low-Temp Cold Room Air Cooler Evaporator, 220/380 V (−50 to 0 °C)
• Blast Freezer Room Evaporator, −50 to 0 °C Drum Type (−50 to 0 °C)

Configuration options

• Series: DD medium temperature, DJ low temperature, DL high throw / blast
• Coil: Copper tube, hydrophilic or plain aluminium fins, 4.5–12 mm spacing
• Defrost: Electric heaters in coil and drain pan, or air/off-cycle for chillers
• Fans: External-rotor axial fans 300–500 mm, IP54 typical